1、清灰：采用高频振动、将进入滤袋壁内的较大的灰尘粒子尽量清除、并不会对纤维的缠结牢度产生影响、保持滤袋良好的耐剥离性。 Using the high-frequency vibration, will try to clear the larger dust particles entering the bag wall, and is not interested in the fiber entangling fastness impact and to maintain good peeling resistance of the filter bag.
2、化学实验处理：提取布袋样品、采用专业仪器化验检测滤袋油污成分、从而选用相适应的洗涤原料、最大限度的洗净滤袋而又不对滤袋造成任何损害。Extraction bag samples, use professional equipment for laboratory testing bag oil composition, thus washing raw materials used to adapt, the maximum wash bag but does not bag cause any damage.
3.检测：采用仪器对清洗后的滤袋进行物理指标检测、确保清洗质量达到要求。Using physical indicators of detection instruments after cleaning bag to ensure the quality of cleaning to meet the requirements.
4.清洗：选用合适的洗涤原料并严格配比、低温水清洗、水流均匀、强度适中、对滤袋没有机械损伤。Appropriate choice of washing raw materials and strict ratio, low-temperature water cleaning, water uniform, moderate intensity, there is no mechanical damage to the bag.
5.烘干：采用110℃左右热空气烘干、保持滤袋的尺寸稳定性、烘干后滤袋不变形、不回缩。 About 110 ° C hot air drying, to maintain the dimensional stability of the bag, the bag after drying no distortion, no retraction.
6.修复：对由于使用产生的磨蚀、孔洞等破损滤袋进行修复、保证很高的回用率。Abrasive, holes and other damage due to the use of the bag to be repaired to ensure a high return rate.
企业网址：http://www.51taoa.com/ | 
您的位置：