1、清灰：选用高频颤动，将进入 滤袋壁内的较大的尘土粒子悉数铲除，并不会对纤维的缠结牢度产生影响，坚持滤袋良好性，污垢的易剥离性。 Cleaning: use high-frequency vibration, will go into a larger bag wall fully eradicate dust particles, will not have an impact on the fiber tangles fastness, stick bag good resistance, dirt and easy peeling.2、化学试验处理： 提取布袋样品，选用专业仪器化验检测滤袋油污成分，然后采用适合的洗涤原材料，最大范围的清洁滤袋而又不对滤袋形成任何危害。Chemical Treatments: Extract the sample bag, bag use professional equipment laboratory testing oil component, and then use the appropriate washing raw materials, the largest range of cleaning bag but the bag does not form any harm.
3、药物浸泡： 选用恰当的化学制剂浸泡滤袋，将滤袋缝隙内的油污尘垢铲除，最大范围的添加滤袋的透气功能。 Drug immersion: the selection of appropriate chemicals soak the bag, the bag within the gap oil grime eradication, the largest range of added features breathable bag.
4、清洁： 采用适宜的洗刷原材料并严厉配比。低温水清洁，水流均匀，强度适宜，对滤袋没有机械损伤。 Clean: wash using appropriate materials and strict ratio. Cold water cleaning, flow uniformity, strength suitable for bag no mechanical damage.
6、修正: 对因为使用过程中发生的磨损腐蚀等破损的 滤袋进行修正，确保非常高的回用率。 Fixed: for because of the use occurred during the wear and corrosion damaged bag correction, ensuring a very high recycling rate.7、检测： 选用仪器对清洁后的滤袋进行物理目标检测，保证清洁质量到达需求。对未达标的将进行修正，直到合格停止。Detection: optional instrument for clean bag after physical target testing to ensure quality of the cleaning reach requirements. For non-compliance will be corrected until qualified stops.
|
您的位置：